CV-51002 datasheet(4/93 Pages) INTEL

4 / 93 page

Density

Ordering Part Number (OPN)

Static Power Reduction

110K LE

5CSEBA6U19I7LN

5CSEBA6U23I7LN

5CSXFC6C6U23I7LN

To estimate total power consumption for a low-power device, listed in Table 1 on page 3:

1. Multiply the Total Static Power reported by the Early Power Estimator (EPE) by the appropriate scale factor:

•

For 25K LE and 40K LE devices, use 0.7

•

For 85K LE and 110K LE devices, use 0.8

2. Add the result from Step 1 on page 4 to the Total Dynamic Power reported by the EPE.

Related Information

Cyclone V Device Overview

Provides more information about the densities and packages of devices in the Cyclone V family.

Electrical Characteristics

The following sections describe the operating conditions and power consumption of Cyclone V devices.

Operating Conditions

Cyclone V devices are rated according to a set of defined parameters. To maintain the highest possible performance and

reliability of the Cyclone V devices, you must consider the operating requirements described in this section.

Absolute Maximum Ratings

This section defines the maximum operating conditions for Cyclone V devices. The values are based on experiments

conducted with the devices and theoretical modeling of breakdown and damage mechanisms.

The functional operation of the device is not implied for these conditions.

Caution:

Conditions outside the range listed in the following table may cause permanent damage to the device. Additionally, device

operation at the absolute maximum ratings for extended periods of time may have adverse effects on the device.

Cyclone V Device Datasheet

CV-51002 | 2019.01.25

Cyclone V Device Datasheet

Send Feedback

CV-51002 bảng dữ liệu(PDF) 4 Page - Intel Corporation