OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Issue A.3 06/08

Page 1 of 2

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

PCB with 3LEDs

Optek Part No.

OPA773

Viewing

Angle

Typical

CCT

Typical Luminous

Flux (lm) @ 15V*

1 board

120°

White

5750K

50

2 boards

100

3 boards

150

4 boards

200

5 boards

250

Power Line Designer Kit

0.5-Watt LED Modules

OVPL5W3K

Contents:

•

Five (5) PCBs 8” in length

•

Three (3) 0.5-Watt white LEDs per PCB,

on-board regulator included

•

Wire harness with connector

•

Hand insertion tool

Product Photo Here

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

RoHS

8.75” by 1.5”Ø tube

The self-contained Power Line Designer Kit is a flexible and scalable lighting solution using mid-power LEDs to

supply high luminous flux without additional heatsinking requirements. The kit includes components and

instructions to allow a designer to configure LED placement as needed for uniform illumination in his application.

With a 15-volt power supply (see Notes), the Power Line Kit is a total lighting solution.

Applications

•

Architectural accent lighting

•

Under-counter lighting

•

Media illumination

•

Lighting for large channel letters

•

Backlighting for light boxes

•

Point-of-sale displays

Notes:

•

All electrical and optical characteristics of the LEDs remain the

same as specified in Optek Datasheet OVS5WBCR4.

•

Maximum storage and operating temperature –40° ~ +100°C

•

ESD threshold (HBM) 2000V

•

14-16V power supply not included. 1.0A minimum rating

required, regulated or unregulated.

5 PCBs 8.00” x 0.425” wide

(.062 FR4 material)

4’ Wire harness

with connector

Hand Insertion Tool

OVPL5W3K

OVPL5W3K