Wiring Diagrams

Multi Color Wiring

NPN

C1

C3

C2

+

_

1

2

3

4

PNP

C1

C3

C2

+

_

1

2

3

4

1 = Brown

2 = White

3 = Blue

4 = Black

C1 = Color 1

C2 = Color 2

C3 = Color 3

Single Color Wiring

NPN

PNP

Specifications

Supply and Voltage Current

10 to 30 V dc at 25 mA max. per LED color

Indicators

LEDs are independently selected; 1, 2, or 3 colors, depending on

model. For other colors/combinations, contact Factory for availability

Standard Models: Entire translucent dome provides even indication

viewable from over 180 degrees

Daylight Visible Models: Clear dome and more focused light provides

even brighter indication when used in high ambient light areas

Input Response Time

Indicator ON/OFF: 1 ms max

Construction

UV stabilized polycarbonate housing

PBT mounting nut max torque 2.3 N·m (20 lbf·in)

Nitrile sealing washer

Connections

4-pin Euro-style integral QD (Q), 150 mm (5.9 in) PVC pigtail QD (QP),

or 4-wire, 2 m (6.5 ft) PVC integral cable, 4 color-coded screw

terminals for up to 16 AWG wire, depending on model, screw terminal

max. torque 0.11 N·m (1.0 lbf·in)

Environmental Rating

Rated IEC IP67, and IP69K, per DIN 40050-9. Cabled models also meet

IP69K if the cable and cable entrance are protected from high-

pressure spray. Indicator side of terminal models meet IP67, and

IP69K when installed in an enclosure. Screw connection points meet

IP00

Meets UL Type 4X and 13 when used with a suitable enclosure

Operating Conditions

−40 °C to 50 °C (−40 °F to 122 °F)

Limited to one color on at a time

Required Overcurrent Protection

WARNING: Electrical connections must be

made by qualified personnel in accordance

with local and national electrical codes and

regulations.

Overcurrent protection is required to be provided by end product

application per the supplied table.

Overcurrent protection may be provided with external fusing or via

Current Limiting, Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to www.bannerengineering.com.

Supply Wiring

(AWG)

Required Overcurrent Protection (Amps)

20

5.0

22

3.0

24

2.0

26

1.0

28

0.8

30

0.5

Certifications

2

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 160690 Rev. G