Datasheet

High-Intensity LED Ring Light for use with VE Series vision sensors

• Compact ring light for VE Series vision sensors

• Four extremely bright LEDs for illumination of targets from 0.15 meters to beyond 2 meters

(0.49 feet to 6.56 feet)

• Continuous or strobed operation

• Optically isolated strobe signal

• Fixed or adjustable intensity, depending on model

• Maintenance-free, rugged construction

• Evenly and intensely illuminates a 610 millimeters (24 inches) diameter at 1 meter (3.28 feet)

Models

Model

LED Color

Intensity Adjustment

Connection

LEDRRV70XD5-XM

Visible red, 620 nm to 630 nm

Fixed

300 mm (12 in) cable with a threaded 3-pin

Pico-style connector1

LEDWRV70XD5-XM

White, 5000 K to 8300 K

LEDBRV70XD5-XM

Visible blue, 465 nm to 485 nm

LEDGRV70XD5-XM

Visible green, 520 nm to 535 nm

LEDIRV70XD5-XM

Infrared, 850 nm

LEDUV395RV70XD5-XM

Ultraviolet, 395 nm

LEDRRV70XD5-PM

Visible red, 620 nm to 630 nm

Potentiometer

LEDWRV70XD5-PM

White, 5000 K to 8300 K

LEDBRV70XD5-PM

Visible blue, 465 nm to 485 nm

LEDGRV70XD5-PM

Visible green, 520 nm to 535 nm

LEDIRV70XD5-PM

Infrared, 850 nm

LEDUV395RV70XD5-PM

Ultraviolet, 395 nm

The following caution applies to ultraviolet, 395 nm models:

CAUTION:

Risk Group 2: UV Emitted from this product.

Eye or skin irritation may result from exposure. Use appropriate shielding and eye protection. Risk Group 2 (RG 2)

products generally do not pose a realistic optical hazard if aversion responses limit the exposure duration or where

lengthy exposures are unrealistic.

- IEC 62471

NOTE: Ring lights are not compatible with VELC..- Sealed Lens Covers. Use another lighting technique if an IP67

rating is needed for your application.

Install the Ring Light

1. Attach the ring light bracket to the sides of the VE Series vision sensor using the provided hardware kit.

2. Connect the cable to the sensor.

Light Intensity Adjustment

Turn the 270° intensity potentiometer with a small flat-blade screwdriver to adjust the light’s intensity.

1. Apply power to the light and turn the potentiometer all the way clockwise for maximum intensity.

2. If the object to be sensed is too bright at maximum intensity, turn the potentiometer counterclockwise, a little at a time, testing with the

target object, until the correct brightness is achieved.

1 Connects directly to the VE Series vision sensors

VE Series LED High-Intensity Ring Light

Original Document

192657 Rev. B

21 September 2016

192657