2016. 03. 26

5/8

DW01C

Revision No : 0

status longer than either

status.

7. Release from overcurrent / short circuit status

Under the overcurrent / short-circuit status, the DW01C will turn on the discharging MOSFET (M1) and restore to normal

BATT + and BATT- is >500KΩ.

Note: When the battery is installed to the protection circuit for the first time, the circuit may not enter into normal operation status, which causing the

battery not able to discharge. When this phenomenon happens, simply short the CS to GND, the circuit will be back to normal.

Timing Diagram

Overcharge status → Load Discharging → Normal Operation status