Datasheet

•

Continuous or strobed operation, selectable via sensor software

•

Solid-state LED matrix

•

Direct connection to

supply using 3 discrete wires

•

Two available bracket options

Models

Model

LED Color

Ambient Light Filter Kit

Polarizing Filter Kit

LEDIA62X62W

Infrared, 940 nm

FLTI (included with IR lights)

—

LEDRA62X62W

Visible red, 630 nm

FLTR (included with LEDAPFKS)

LEDAPFKS

LEDWA62X62W

White, all visible

FLTB or FLTG

LEDBA62X62W

Blue, 464 to 475 nm

FLTB

LEDGA62X62W

Green, 520 to 540 nm

FLTG

Installing the Area Light

Note: Before installing this area light it is recommended that an ambient light filter be installed behind the lens.

The filter improves image quality by reducing unwanted ambient light.

Sensing Shiny Surfaces: To eliminate direct reflections without using polarizing filters, angle the sensor approximately 15° (or more)

from perpendicular to a shiny surface.

Polarizing Kit: If it is necessary to mount the camera at a 90° angle to a shiny surface, the polarizing filter kit provides filters for both

the LED area light and sensor to reduce the negative effects of strong, direct light reflections. The red filter kit (FLTR) is included

with the polarizing kit. When light colors other than red are used, discard the red filter in the polarizing kit and use the proper filter

listed in the models table. The polarizing filters reduce the amount of light returned to the sensor.

Cleaning Instructions

Regularly remove any dust, dirt, or fingerprints from the light source.

1. Blow off dust using anti-static compressed air.

2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any other

chemicals for cleaning.

Wiring Table

LED..A80X80W Wire

Terminal Block

External Power Supply (Strobed)

External Power Supply

(Continuous)

Brown

Pin 1, + V (24 V dc ±10%)

+ V

+ V

Blue

Pin 2, - V (dc common)

- V

- V

Black

Pin 4 (strobe)

+5 V dc OFF

- V ON

- V

LED..A62X62W Series Area Lights

Original Document

121779 Rev. D

19 February 2019

121779