S-8245C datasheet(13/41 Pages) ABLIC

13 / 41 page

BATTERY PROTECTION IC FOR 3-SERIAL TO 5-SERIAL CELL PACK

Rev.1.4_00

S-8245A/C Series

1. 24 0 V battery charge starting charger voltage (V0CHA) (0 V battery charge function "available")

When the voltage V15 is gradually decreased after setting V1 = V2 = V3 = V4 = V5 = 0 V and VCO is "H", the

absolute value of V15 is defined as the 0 V battery charge starting charger voltage (V0CHA).

1. 25 0 V battery charge inhibition battery voltage n (V0INHn) (0 V battery charge function "unavailable")

When the voltage V1 is gradually decreased and VCO changes from "H" to "L", V1 is defined as the 0 V battery

charge inhibition battery voltage 1 (V0INH1).

0 V battery charge inhibition battery voltage n (V0INHn) (n = 2 to 5) can be determined in the same way as when n =

1. 26 CTLC pin reverse voltage (VCTLC)

When the voltage V16 is gradually increased and VCO changes from "H" to "L", V16 is defined as the CTLC pin

reverse voltage (VCTLC).

1. 27 CTLD pin reverse voltage (VCTLD)

When the voltage V17 is gradually increased and VDO changes from "H" to "L", V17 is defined as the CTLD pin

reverse voltage (VCTLD).

1. 28 PSI pin reverse voltage (VPSI)

When the voltage V18 is gradually decreased and VPSO changes from "L" to "H", V18 is defined as the PSI pin

reverse voltage (VPSI).

1. 29 CTLC pin response delay time (tCTLC)

The CTLC pin response delay time (tCTLC) is the time period from when the voltage V16 changes to V16 = VDS until

when VCO changes from "H" to "L".

1. 30 CTLD pin response delay time (tCTLD)

The CTLD pin response delay time (tCTLD) is the time period from when the voltage V17 changes to V17 = VDS until

when VDO changes from "H" to "L".

1. 31 PSI pin response delay time (tPSI)

The PSI pin response delay time (tPSI) is the time period from when the voltage V18 changes to V18 = 0 V until

when VPSO changes from "L" to "H".

1. 32 CTLC pin current "H" (ICTLCH), CTLC pin current "L" (ICTLCL)

The CTLC pin current "H" (ICTLCH) is ICTLC when V16 = VDS.

The CTLC pin current "L" (ICTLCL) is ICTLC when V16 = 0 V.

1. 33 CTLD pin current "H" (ICTLDH), CTLD pin current "L" (ICTLDL)

The CTLD pin current "H" (ICTLDH) is ICTLD when V17 = VDS.

The CTLD pin current "L" (ICTLDL) is ICTLD when V17 = 0 V.

1. 34 PSI pin current "H" (IPSIH), PSI pin current "L" (IPSIL)

The PSI pin current "H" (IPSIH) is IPSI when V18 = VDS.

The PSI pin current "L" (IPSIL) is IPSI when V18 = 0 V.

S-8245C bảng dữ liệu(PDF) 13 Page - ABLIC Inc.