LED (Bi-color)

Node Status

Flashing green

Radio link okay

Green and red flashing alternately

In Binding mode

Both colors are solid for 4 seconds, then flash 4 times; looks amber

Binding mode is complete

Flashing red, once every 3 seconds

Radio link error

Flashing red, once every second

Device error

Assemble the TL70 Wireless Communication Segment

Align the notches

Notches shown in locked position

To assemble the modules:

1. Position the TL70 Wireless Communication Segment on the base.

The communication segment must mount directly to the TL70 base.

2. Align the notches on each module and press together.

3. Rotate the top module clockwise to lock into place (notches shown in

the locked position).

4. Assemble the remaining modules in the desired order.

Follow the instructions and wiring diagrams on the TL70 Modular Tower Light

datasheet, using either the standard or AC voltage base for triggering

appropriate inputs.

The User Configuration Tool (UCT) offers an easy way to link I/O points in your wireless network, view I/O register values, and set

system communication parameters when a host system is not part of the wireless network. The software runs on any computer

with the Windows Vista, Windows 7, Windows 8, or Windows 10 operating system.

Use a USB to RS-485 adapter cable to connect a standalone DX80 Gateway to the

computer. For DXM Controllers with an internal DX80 radio, connect a computer to the

DXM Controller using a USB or Ethernet connection. Download the most recent revisions

of the UCT software from Banner Engineering's website:

www.bannerengineering.com/

wireless.

The USB to RS-485 adapter cable is not required for the DXM Controller. For standalone

DX80 Gateway devices use:

•

USB to RS-485 adapter cable model BWA-UCT-900 for 1 Watt radios

•

USB to RS-485 adapter cable model BWA-HW-006 for all other radios

Modbus Registers

Modbus holding registers for the 8-pin models. On 5-pin models, the M5 and M6 modules are not available. When DIP Switch 7 and 5 are enabled, the I/O range for

all outputs is up to 0xFFFF, based on which flash pattern message is being created. Input register values: 0 = OFF, 1 = ON and if DIP Switch 6 is enabled then 2 =

Flashing OFF, 3 = Flashing ON is added.

I/O

Modbus Holding Register

I/O Type

I/O Range

Holding Register

Representation (Dec.)

Module #

Gateway

Any Node

Min.

Max.

Min.

Max.

1

1

1 + (Node# × 16)

Discrete IN 1 / Bit-packed inputs ¹

0

3 / 63

0

3 / 63

M1

2

2

2 + (Node# × 16)

Discrete IN 2

0

3

0

3

M2

3

3

3 + (Node# × 16)

Discrete IN 3

0

3

0

3

M3

4

4

4 + (Node# × 16)

Discrete IN 4

0

3

0

3

M4

5

5

5 + (Node# × 16)

Discrete IN 5 / 32-bit event counter high word ²

0

3 / 65535

0

3 / 65535

M5

6

6

6 + (Node# × 16)

Discrete IN 6 / 32-bit event counter low word ²

0

3 / 65535

0

3 / 65535

M6

7

7

7 + (Node# × 16)

Reserved

8

8

8 + (Node# × 16)

Device Message

9

9

9 + (Node# × 16)

Discrete OUT 9 / Bit-picked outputs ¹

0

1 / 63

0

1 / 63

M1

TL70 Wireless Communication Segment

4

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 204207 Rev. B