Datasheet

General-purpose LED work lighting

•

Intensity can be controlled from 0 to 100% using Pulse Width Modulation

(PWM) on an input control wire

•

Three lens options, depending on model, to vary spot size

•

Illuminates a large area with an even pattern of light and no shadows

•

12 to 30 V dc operation

•

Cabled and quick-disconnect models available

•

50 mm diameter with flat profile and 30 mm mounting base

•

Rugged sealed housing rated to IP69K

For PWM dimming, use with the LC65 Dimmer Module. For more information, refer to the LC65 LED

Dimmer Module datasheet, p/n 177086.

Model1

LED Color

Lumens

Lux

Lens Angle

Connection

0.5 m

1 m

WL50SWL5PWMQ

White, 5000-8300 K

295

13780

3445

±5° (smaller,

more focused

spot; see graph)

5-pin Euro-style

integral QD

connector (use with a

4-wire mating

cordset; only 3 wires

used for connection)

WL50SWL11PWMQ

White, 5000-8300 K

285

5460

1365

±11° (larger spot;

see graph)

WL50SWL20PWMQ

White, 5000-8300 K

270

2000

500

±20° (largest

spot; see graph)

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

1 Integral QD models only are listed. To order the integral 2 m (6.5 ft) PVC cable models, omit the suffix Q from model number

(example, WL50SWL5PWM). A model with a QD requires a mating cordset.

WL50S High-Intensity Spot Light - PWM

Dimmable

Original Document

179498 Rev. B

21 April 2016

179498