Brackets

SMB22A

•

Right-angle bracket with curved slot

for versatile orientation

•

12-ga. stainless steel

•

Mounting hole for 22 mm sensor

32

41

46

A

B

C

Hole center spacing: A to B = 26.0

Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2

SMB22FVK

•

V-clamp, flat bracket and fasteners

for mounting to pipe or extensions

•

Clamp accommodates 28 mm

diameter tubing or 1 in. square

extrusions

•

22 mm hole for mounting sensor

46

118

34

A

ø22.5

Hole size: A = ø 22.5

SMB22RAVK

•

V-clamp, right-angle bracket and

fasteners for mounting to pipe or

extensions

•

Clamp accommodates 28 mm

diameter tubing or 1 in. square

extrusions

•

22 mm hole for mounting sensor

90

A

57

46

Hole size: A = ø 22.5

SMBAMS22P

•

Flat SMBAMS series bracket with 22

mm hole for mounting sensors

•

Articulation slots for 90+° rotation

•

12-ga. (2.6 mm) cold-rolled steel

45

93

A

C

B

Hole center spacing: A = 26.0, A to B = 13.0

Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5

SMBAMS22RA

•

Right-angle SMBAMS series bracket

with 22 mm hole for mounting

sensors

•

Articulation slots for 90+° rotation

•

12-ga. (2.6 mm) cold-rolled steel

A

C

B

53

48

45

Hole center spacing: A = 26.0, A to B = 13.0

Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5

TC-K30-CL

•

Touch cover

Ø A

B

Diameter: A = 40.7

Height: B = 31

All measurements are listed in millimeters, unless noted otherwise.

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp.

www.bannerengineering.com - Tel: +1-763-544-3164