LED (Bi-color)

Node Status

Flashing green

Radio link okay

Green and red flashing alternately

In Binding mode

Both colors are solid for 4 seconds, then flash 4 times; looks amber

Binding mode is complete

Flashing red, once every 3 seconds

Radio link error

Flashing red, once every second

Device error

The User Configuration Tool (UCT) software runs on any Windows machine and uses a USB to RS-485 adapter cable to

connect your Gateway to the computer.

The User Configuration Tool (UCT) offers an easy way to link I/O points in

your wireless network, view I/O register values graphically, and set system

communication parameters when a host system is not part of the wireless

network. Download the most recent revisions of the UCT software from

Banner Engineering's website: http://www.bannerengineering.com/wireless.

The UCT requires a special USB to RS-485 (model number BWA-UCT-900 for

1 Watt radios, BWA-HW-006 can be used for all other radios) converter

cable to pass information between your computer and the Gateway.

Creating Flash Patterns

Use the User Configuration Tool (UCT) to set the Duty Cycle, For Outputs of Node 1, output 9, to 0x0F0F as shown below,

to achieve this flash pattern.

Flash a K70 light by entering a time-based bit mask into the Duty Cycle parameter for that output register. Bit 0

represents the first 62.5 ms time window, bit 1 represents the second 62.5 ms window, etc.

For example, turn ON the output from 0 to 250 ms, OFF from 250 to 500 ms, ON from 500 to 750 ms, then OFF again

from 750 ms to 1 second by writing 0x0F0F to the appropriate output.

Bit

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

Bin

0

0

0

0

1

1

1

1

0

0

0

0

1

1

1

1

Hex

0

F

0

F

Light

Turned off from 750 ms to 1 s

Turned on from 500 to 750 ms

Turned off from 250 to 500 ms

Turned on from 0 to 250 ms

This example shows 0F0F being written to the Duty Cycle, For Outputs parameter for Node 1, output 9.

4

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 189843 Rev. D