| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MP3378E bảng dữ liệu(PDF) 4 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP3378E bảng dữ liệu(HTML) 4 Page - Monolithic Power Systems |
|
4 / 23 page ![]() MP3378E – 4-CHANNEL WLED CONTROLLER WITH BUCK CONVERTER MP3378E Rev. 1.02 www.MonolithicPower.com 4 5/26/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. ABSOLUTE MAXIMUM RATINGS (1) WLED Controller VIN1 .............................................. -0.3V to +28V VLED1 to VLED4 .................................. -1V to +55V VGATE, VCC1, VISENSE ..................... -0.3V to +6.5V All other pins.............................. –0.3V to VCC1 Buck Converter VIN2, VSW ....................................... –0.3V to 28V VBST ...................................................... VSW+6V All other pins................................... –0.3V to 6V Continuous power dissipation (TA = 25°C) (2) TSSOP-28 EP ...........................................3.9W Junction Temperature .............................. 150°C Lead Temperature ................................... 260°C Recommended Operating Conditions (3) Supply voltage (VIN1, VIN2) .................. 5V to 24V Operating junction temp. (TJ). .. -40°C to +125°C Thermal Resistance (4) θJA θJC TSSOP-28 EP……………......….32........6....°C/W NOTES: 1) Exceeding these ratings may damage the device. The voltage is measured with a 20MHz bandwidth limited oscilloscope. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- ambient thermal resistance θ JA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation produces an excessive die temperature, causing the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on JESD51-7, 4-layer PCB. |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |