HT32R0R5B101CG datasheet(8/11 Pages) WALSIN

8 / 11 page

Multilayer Ceramic Capacitors

Approval Sheet

Page 8 of 11

ASC_High Temperature Cap_(HT)_026B_AS

Dec. 2018

No.

Item

Test Condition

Requirements

12. Temperature

Cycle

* Conduct the five cycles according to the temperatures and

time.

Step

Temp. (°C)

Time (min.)

Min. operating temp. +0/-3

30±3

Room temp.

2~3

Max. operating temp. +3/-0

30±3

Room temp.

2~3

*Before initial measurement (Class II only): To apply de-aging

at 150°C for 1hr then set for 24±2 hrs at room temp .

* Cap. / DF(Q) / I.R. Measurement to be made after de-aging

at 150°C for 1hr then set for 24±2 hrs at room temp .

* No remarkable damage.

* Cap change：

X8G: within ±2.5％ or ±0.25pF whichever is larger.

X8R: within ±7.5%

* Q/D.F., I.R. and dielectric strength: To meet initial requirements.

13. Humidity

(Damp Heat)

Steady State

* Test temp.: 40±2°C

* Humidity: 90~95% RH

* Test time: 500+24/-0hrs.

* Before initial measurement (Class II only): To apply de-aging

at 150°C for 1hr then set for 24±2 hrs at room temp .

* Cap. / DF(Q) / I.R. Measurement to be made after de-aging

at 150°C for 1hr then set for 24±2 hrs at room temp .

* No remarkable damage.

* Cap change: X8G: within ±5.0% or ±0.5pF whichever is larger.

X8R: within ±12.5%

* Q/D.F. value:

X8G: Cap

≥30pF, Q≥350; 10pF≤Cap<30pF, Q≥275+2.5C

Cap<10pF; Q

≥200+10C

X8R:

≤7.5%

* I.R.:

≥1G or RxC≥50 -F whichever is smaller.

14. Humidity

(Damp Heat)

Load

* Test temp.: 40±2°C

* Humidity: 90~95%RH

* Test time: 500+24/-0 hrs.

* To apply voltage：rated voltage

* Before initial measurement (Class II only): To apply de-aging

at 150°C for 1hr then set for 24±2 hrs at room temp .

* Cap. / DF(Q) / I.R. Measurement to be made after de-aging

at 150°C for 1hr then set for 24±2 hrs at room temp .

* No remarkable damage.

* Cap change: X8G: within ±7.5% or ±0.75pF whichever is larger.

X8R: within ±12.5%

* Q/D.F. value:

X8G: Cap

≥30pF, Q≥200; Cap<30pF, Q≥100+10/3C

X8R:

≤7.5%

* I.R.:

≥500M or RxC≥25 -F whichever is smaller.

15. High

Temperature

Load

(Endurance)

* Test temp.:

X8G, X8R: 150±3°C

* To apply voltage: 200% of rated voltage.

* Test time: 1000+24/-0 hrs.

* Before initial measurement (Class II only): To apply de-aging

at 150°C for 1hr then set for 24±2 hrs at room temp .

* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at

150°C for 1hr then set for 24±2 hrs at room temp.

* No remarkable damage.

* Cap change: X8G: within ±3.0% or ±0.3pF whichever is larger.

X8R: within ±12.5%

* Q/D.F. value:

X8G: Cap

≥30pF, Q≥350

10pF

≤Cap<30pF, Q≥275+2.5C

Cap<10pF, Q

≥200+10C

X8R:

≤7.5%

* I.R.:

≥1G or RxC≥50 -F whichever is smaller.

HT32R0R5B101CG bảng dữ liệu(PDF) 8 Page - WALSIN TECHNOLOGY CORPORATION

HT32R0R5B101CG bảng dữ liệu(HTML) 8 Page - WALSIN TECHNOLOGY CORPORATION

Html Pages

1 2 3 4 5 6 7 8 9 10 11

bảng dữ liệu tải về

Link URL