Quick Start Guide

Advanced sensor with dual digital displays for small object counting applications

For complete technical information about this product, including dimensions, accessories, and specifications, see http://

www.bannerengineering.com and search 178236.

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Overview

Figure 1. DF-G2 Model Features

1

Output LED

2

LO/DO Switch

3

RUN/PRG/ADJ Mode Switch

4

Lever Action Fiber Clamp

5

Red Signal Level

6

Green Threshold

7

+/SET/- Rocker Button

Models

Model

Outputs

Connector1

DF-G2-NC-2M

Single NPN, plus Health Mode output

2 m (6.5 ft) cable, 5-wire

DF-G2-PC-2M

Single PNP, plus Health Mode output

DF-G2-NC-Q5

Single NPN, plus Health Mode output

150 mm (6 in) PVC cable with a 5-pin M12/Euro-style quick

disconnect

DF-G2-PC-Q5

Single PNP, plus Health Mode output

DF-G2-NC-Q7

Single NPN, plus Health Mode output

Integral 5-pin M8/Pico-style quick disconnect

DF-G2-PC-Q7

Single PNP, plus Health Mode output

1 Connector options:

•

A model with a QD connector requires a mating cordset

•

For 9 m cable, change the suffix 2M to 9M in the 2 m model number (example, DF-G2-NC-9M)

•

For 150 mm (6 in) PVC cable with a 5-pin M8/Pico-style QD model, change the suffix 2M to Q3 in the 2 m model number

(example, DF-G2-NC-Q3)

•

For Q3 and Q7 models, use a 5-pin M8/Pico-style or a 6-pin M8/Pico-style mating cordset

Small Object Counter

Original Document

178061 Rev. E

9 September 2015

178061