2225B104F102CT datasheet(7/10 Pages) WALSIN

7 / 10 page

Multilayer Ceramic Capacitors

Approval Sheet

Page 7 of 10

ASC_1825 2220 2225_025I_DS

May. 2019

No.

Item

Test Condition

Requirements

13. Humidity

(Damp Heat)

Steady State

* Test temp.: 40±2°C

* Humidity: 90~95% RH

* Test time: 500+24/-0hrs.

*Before initial measurement (Class II only): To apply de-aging at

150°C for 1hr then set for 24±2 hrs at room temp.

* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at

150°C for 1hr then set for 24±2 hrs at room temp.

* No remarkable damage.

* Cap change:

NP0: within ±5% or 0.5pF whichever is larger.

X7R: within ±12.5%.

* Q/D.F.:

NP0: More than 30pF Q

≥350, 10pF≤C≤30pF, Q≥275+2.5C.

Less than 10pF Q

≥200+10C.

X7R:

≤2 × Initial requirements.

* I.R.:

≥1G or R•C≥50 -F whichever is smaller.

14. Humidity

(Damp Heat)

Load

*Test temp.：40±2°C

*Humidity：90~95%RH

*Test time：500+24/-0 hrs.

*To apply voltage：

Rated voltage (MAX. 500V)

*Before initial measurement (Class II only): To apply de-aging at

150°C for 1hr then set for 24±2 hrs at room temp.

* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at

150°C for 1hr then set for 24±2 hrs at room temp.

* No remarkable damage.

* Cap change:

NP0: ±7.5% or 0.75pF whichever is larger.

X7R: within ±12.5%

* Q/D.F.:

NP0: More than 30pF,Q

≥200;C<30pF, Q≥100+10/3C

X7R:

≤2 × Initial requirements.

* I.R.:

≥500M or R•C≥5 -F whichever is smaller.

15. High

Temperature

Load

(Endurance)

* Test temp.:125±3°C

* To apply voltage:

(1) Cap.

≥1µF: 150% of rated voltage.

(2) Ur

≤250V: 200% of rated voltage.

(3) 250V<Ur

≤500V: 150% of rated voltage.

(4) 500V<Ur

≤3000V: 120% of rated voltage.

(5) 4000V: 110% of rated voltage.

*Test time: 1000+24/-0 hrs.

*Before initial measurement (Class II only): To apply de-aging at

150°C for 1hr then set for 24±2 hrs at room temp.

* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C

for 1hr then set for 24±2 hrs at room temp.

* No remarkable damage.

* Cap change:

NP0: within ±3% or 0.3pF whichever is larger.

X7R: within ±12.5%.

* Q/D.F.:

NP0: More than 30pF Q

≥350, 10pF≤C≤30pF, Q≥275+2.5C

Less than 10pF Q

≥200+10C

X7R:

≤2 × Initial requirements.

* I.R.:

≥1G or R•C≥50 -F whichever is smaller.

2225B104F102CT bảng dữ liệu(PDF) 7 Page - WALSIN TECHNOLOGY CORPORATION

2225B104F102CT bảng dữ liệu(HTML) 7 Page - WALSIN TECHNOLOGY CORPORATION

Html Pages

1 2 3 4 5 6 7 8 9 10

bảng dữ liệu tải về

Link URL