ff680 datasheet(21/120 Pages) EPSON

21 / 120 page

Determining the Scanner's IP Address

If you have multiple scanners on your network, you need to know the IP address of the scanner when

setting up network scanning.

Do one of the following to start EpsonNet Config:

• Windows 10: Click

> EpsonNet > EpsonNet Config.

• Windows 8.x: Navigate to the Apps screen and select EpsonNet Config.

• Windows (other versions): Click

or Start, and select All Programs or Programs. Select

EpsonNet > EpsonNet Config > EpsonNet Config.

• Mac: Open the Applications folder and select Epson Software > EpsonNet > EpsonNet Config

> EpsonNet Config.

Locate your scanner in the list and write down the IP address.

Parent topic: Setting Up Network Scanning

Epson DocumentScan App for iOS/Android

You can use the Epson DocumentScan app to scan from a network scanner to an iOS or Android device

over a direct Wi-Fi connection.

For more information about Epson DocumentScan, search for the app on the App Store (iOS) or Google

Play (Android).

Note: Epson DocumentScan only supports document scanning, not photo scanning.

Parent topic: Wi-Fi Networking

Disabling Wi-Fi Features

You may need to disable your product's Wi-Fi features if you change your network connection type or

need to solve a problem with your network connection.

Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and

password, and any network settings selected for Epson DocumentScan.

Press and hold the

Wi-Fi button on the scanner for at least three seconds to disable the Wi-Fi

features. When the

Wi-Fi light and the

AP mode light turn off, Wi-Fi is disabled.

Parent topic: Wi-Fi Networking

ff680 bảng dữ liệu(PDF) 21 Page - Epson Company