Datasheet

For complete technical information about this product, including dimensions, accessories, and specifications, see http://

www.bannerengineering.com and search for your model number. See also document 121525.

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so

could lead to serious injury or death. This device does not include the self-

checking redundant circuitry necessary to allow its use in personnel safety

applications. A sensor failure or malfunction can cause either an energized or

de-energized sensor output condition.

Models

Models 1

Sensing Mode

Range

LED

Output

T183E

Opposed

20 m (66 ft)

Infrared, 950 nm

-

T18AW3R

LO

T18RW3R

DO

T18AW3L

Retroreflective with Gain Control

2 m (79 in) 2

LO

T18RW3L

DO

T18AW3LP

Polarized Retroreflective

Visible Red, 680 nm

LO

T18RW3LP

DO

T18AW3D

Diffuse with Gain Control

300 mm (12 in)

Infrared, 880 nm

LO

T18RW3D

DO

T18AW3FF25

Fixed Field

25 mm (1 in) Cutoff

LO

T18RW3FF25

DO

T18AW3FF50

50 mm (2 in) Cutoff

LO

T18RW3FF50

DO

T18AW3FF100

100 mm (4 in) Cutoff

LO

T18RW3FF100

DO

Wiring

Cabled Emitters

All Other Cabled Models

Key

1

3

20-250 V ac

+

−

1

3

4

20-250 V ac

Load

+

−

1. Brown

2. White

3. Blue

4. Black

1 Standard 2 m (6.5 ft) cable models are listed.

•

To order the 9 m (30 ft) cable models, add suffix W/30 (for example, T183E W/30).

•

To order the 4-pin Micro-style QD models, add suffix Q1 (for example, T183EQ1). A model with a QD connector requires a mating cable.

2 Use polarized models when shiny objects will be sensed.

T18 Series Sensors (AC Voltage)

Original Document

116164 Rev. C

18 October 2017

116164