| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
CFA633-RDI-KS bảng dữ liệu(PDF) 45 Page - Crystalfontz America, Inc. |
|
|
|||||||||||||||||||||||||||||
CFA633-RDI-KS bảng dữ liệu(HTML) 45 Page - Crystalfontz America, Inc. |
|
45 / 88 page ![]() Crystalfontz America, Inc. Data Sheet Release Date 2012/02/21 www.crystalfontz.com CFA633-RDI-KS LCD Module (Hardware v2.0 / Firmware s2v1) February 2012 Page 45 The return packet will be: type = 0x40 | 0x0D = 0x4D = 7710 data_length = 0 Set LCD Contrast is one of the items stored by the command 4 (0x04): Store Current State As Boot State (Pg. 39). 14 (0x0E): Set LCD & Keypad Backlight This command sets the brightness of the LCD and keypad backlights. type: 0x0E = 1410 valid data_length is 1 data[0] = backlight power setting (0-100 valid) 0 = off 1-99 = variable brightness 100 = on The return packet will be: type: 0x40 | 0x0E = 0x4E = 7810 data_length = 0 Set LCD & Keypad Backlight is one of the items stored by the command 4 (0x04): Store Current State As Boot State (Pg. 39). 15 (0x0F): (Deprecated) 16 (0x10): Set Up Fan Reporting This command will configure the CFA633 to report the fan speed information to the host every 500 mS. type = 0x10 = 1610 valid data_length is 1 data[0] = bitmask indicating which fans are enabled to report (0-15 valid) ---- 8421 Enable Reporting of this Fan’s Tach Input |||| ||||-- Fan 1: 1 = enable, 0 = disable |||| |||--- Fan 2: 1 = enable, 0 = disable |||| ||---- Fan 3: 1 = enable, 0 = disable |||| |----- Fan 4: 1 = enable, 0 = disable The return packet will be: type = 0x40 | 0x10 = 0x50 = 8010 data_length = 0 If data[0] is not 0, then the CFA633 will start sending 0x81: Fan Speed Report packets for each enabled fan every 500 mS. (See 0x81: Fan Speed Report (Pg. 36).) Each of the report packets is staggered by 1/8 of a second. Reporting a fan will override the fan power setting to 100% for up to 1/8 of a second every 1/2 second. Please see Fan Connections in Fan Connections (Pg. 31) for a detailed description. 17 (0x11): Set Fan Power This command will configure the power for the fan connectors. The fan power setting is one of the items stored by the command 4 (0x04): Store Current State As Boot State (Pg. 39). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |