| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
GPCE040A bảng dữ liệu(PDF) 11 Page - Generalplus Technology Inc. |
|
|
|||||||||||||||||||||||||||||
GPCE040A bảng dữ liệu(HTML) 11 Page - Generalplus Technology Inc. |
|
11 / 26 page ![]() GPCE040A © Generalplus Technology Inc. Proprietary & Confidential 11 Oct 01, 2013 Version: 1.4 6.11. Serial interface I/O (SIO) Serial interface I/O offers a one-bit serial interface for communication. This serial interface is capable of transmitting or receiving data via two I/O pins, IOB0 (SCK) and IOB1 (SDA). Ax+1 Ax Ax-1 A0 Dx+1 Dx D0 Dx+1 Dx D0 SDA 1st write P_SIO_Data (W), $701AH 2nd write P_SIO_Data (W), $701AH STOP WRITE MODE Ax+1 Ax Ax-1 A0 Dx+1 Dx D0 Dx+1 Dx D0 SCK SDA SDA 1st Read P_SIO_Data (R), $701AH 2nd Read P_SIO_DAta (R), $701AH STOP READ MODE write control bit=0 read control bit = 1 SCK SDA 6.12. UART UART block provides a full-duplex standard interface that facilitates the communication with other devices. With this interface, GPCE can transmit and receive simultaneously. The maximum baud-rate can be up to 115200bps. This function can be accomplished by using PortB and Interrupt (UART IRQ). The Rx and Tx of UART are shared with IOB7 and IOB10. When GPCE040A receives and/or transmits a frame of data, the b7 (RxRDY) and/or b6 (TxRDY) in Port_UART_Command2(R) will be set to “1” and the UART IRQ is activated at the same time. D0 D1 D2 D3 D4 D5 D6 D7 parity bit stop bit start bit 8-bit data can be enabled/disable; also even/odd check 1-bit Stop 1-bit Start 6.13. Audio Algorithm The following speech types can be used in GPCE040A: PCM, SACM_S200, SACM_S480, SACM_S530, SACM_S720, SACM_A1600, SACM_A1601, SACM_A3600, SACM_DVR520, SACM_DVR1600, SACM_DVR3200, and SACM_DVR4800. For melody synthesis, the GPCE040A supports SACM_MS01 (FM) and SACM_MS02 (wave-table) synthesizers. 6.14. Bonding Option Summary The GPCE040A has the following bonding option: 6.14.1. Watchdog function WDGOPT is the optional pin for watchdog by bonding option. The shape looks as the figure given below. When watchdog is selected, WDGOPT is unbonded. If watchdog is not selected, WDGOPT is bonded. The reason for WDGOPT adjacent to VDD is that when watchdog is not selected, it is easy to make the connection between VDD and WDGOPT. VDD WDGOPT |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |