Automatic Dicing Saw

DAD3240

2016.11

Specifications

High maintainability

Built-in microscope with a lens shutter and scope blow function

reduces maintenance frequency, which increases the utilization rate.

Environmentally-conscious design

The DAD3240 is a green procurement compliant product, which

means it does not contain the 15 hazardous chemical substances

listed in the “List of DISCO Restricted Substances” and the six

substances specified in the EU RoHS Directive.

* A green procurement compliant product refers to products that satisfy DISCO's

green procurement standards and conforms to EU RoHS Directives.

Environmental Conditions

• Use clean, oil-free air (dew point between -10 - -20 , residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).

• Keep room temperature fluctuations within ±1℃ of the set value. (Set value should be between 20 - 25 ℃).

• Keep cutting water and cleaning water 2 ℃ above room temperature (fluctuations within ±1 ℃).

• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.

• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.

* All pressures specified above are gauge pressures.

* As the above specification may change due to technical modifications.

Please confirm when placing your order.

* For further information, please contact your local sales representative.

www.disco.co.jp

Unit

-

Max. φ

8” (□8”/DPR).

Cutting range

mm

210

Cutting speed

mm/sec

0.1 - 600

Cutting range

mm

210

Index step

mm

0.0001

Index positioning accuracy

mm

0.003/210

(Single error)0.002/5

Max. stroke

mm

32.2

Moving resolution

mm

0.00005

Repeatability accuracy

mm

0.001

θ-axis Max. rotating angle

deg

320

Output

kW

1.8

Rated torque

N・m

0.29

Revolution speed range

min

-1

6,000 - 60,000

mm

650 × 950 × 1,600

kg

Approx.530

Machine weight

Y-axis

Machine dimensions(W×D×H)

Z-axis

Spindle

Specification

X-axis

Workpiece size