1/7

MA7023

Major Power Technology Co., Ltd.

Rev.1.4 Nov.16, 2017

Single Output Hall Effect Latch



GENERAL DESCRIPTION

MA7023 is an integrated Hall-Effect latch sensor with pull-up resistor designed for electronic

commutation of brush-less DC motor applications. The device is using HV BCD process

includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies

the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and

open-collector output. An internal band-gap regulator is used to provide temperature

compensated supply voltage for internal circuits and allows a wide operating supply range.

If a magnetic flux density larger than threshold Bop, OUT is turned on(low). The output state

is held until a magnetic flux density reversal falls below Brp causing OUT to be turned off

(high).



FEATURES

-

2.5V to 26V DC operation voltage

-

Temperature compensation

-

Wide operating voltage range

-

Open-Drain pre-driver

-

25mA maximum sinking output current.

-

Low Profile SOT23-3L and SIP-3L(TO-92S) Package( Green and Lead Free )



PIN ASSIGNMENT

The package of MA7023 are SOT23-3L and SIP-3L ; the pin assignment is given by:

VDD

OUT

(Top View)

GND

1

VDD

2

GND

3

OUT

(Top View)

MA7023

SIP-3L

MA7023

2

3

1

SOT23-3L

Name

Description

VDD

Supply Voltage

OUT

Output

GND Ground.