©

RFbeam Microwave GmbH | Schuppisstrasse 7 | CH-9016 St. Gallen | www.rfbeam.ch | K-MD2 Engineering Sample | data sheet

07/2018 – Revision A | Page 1/1

– 24 GHz FMCW radar with digital signal processing

– Angle of arrival in azimuth/elevation

– Serial target list output

– Detection distance: 100 m for persons/200 m for cars

– Distance range: 0–250 m, 1m resolution

– Speed range: ±130 km/h, 1 km/h resolution

– Angle range: ± 9.1° (elevation) ± 16.4° (azimuth),

0.1° resolution

– Compact size: 120 × 72 × 15 mm

– Traffic analysis and classification

– Intersection management

– Security systems

– Object speed measurement systems

– Measurement and research applications

– Industrial sensors

The K-MD2 is a high-end 3D radar transceiver with three recei-

ving channels and a low phase noise, PLL controlled transmitter.

The target information from the three receive antennas is digiti-

zed and the high speed digital signal processing performs range

and doppler FFT’s with an update rate of 20 measurements per

second. Using the serial interface, many operating parameters

such as frequency, bandwidth and repetition rate can be adjus-

ted. Results are available in target list format as well as in raw

range-doppler matrices. Ethernet and a serial communication

interfaces are included.

Features

Applications

Description

Blockdiagram

K-MD2

PLL & VCO

23.8– 24.8 GHz

RAM

FPGA

Tx

Rx1

Rx2

Rx3

A/D

A/D

A/D

Flash

Digital I/O

– Ethernet

– Serial

Figure 1: Blockdiagram

data sheet

K-MD2

Engineering Sample

radar transceiver

with integrated signal processing

PRODUCT INFORMATION

Figure 1: Blockdiagram