STANDARD

MICROCIRCUIT DRAWING

SIZE

A

5962-99612

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

REVISION LEVEL

B

SHEET

3

DSCC FORM 2234

APR 97

1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:

Outline letter

Descriptive designator

Terminals

Package style

N

See figure 1

3

Z-tab with nonisolated tab,

(TO-257Z), with glass seal

T

See figure 1

3

Flange mount with nonisolated tab,

(TO-257), with glass seal

U

See figure 1

3

Flange mount with isolated tab,

(TO-257), with glass seal

Z

See figure 1

3

Z-tab with isolated tab,

(TO-257Z), with glass seal

1.2.5 Lead finish. The lead finish shall be as specified in MIL-PRF-38534.

1.3 Absolute maximum ratings. 1/

Input-output voltage differential:

Device types 01 and 03 ......................................................40 V dc

Device type 02....................................................................60 V dc

Device type 04....................................................................50 V dc

Operating junction temperature range ...................................-55

C to +150C

Storage temperature ..............................................................-65

C to +150C

Lead temperature (soldering, 10 seconds).............................300

C

Thermal resistance, junction to case (



Cases N and T .................................................................3.5

C/W

Cases U and Z .................................................................4.2

C/W

1.4 Recommended operating conditions.

Output voltage range:

Device type 01 .................................................................1.2 to 37 V dc

Device type 02 .................................................................1.2 to 57 V dc

Device type 03 .................................................................-1.2 to -37 V dc

Device type 04 .................................................................-1.2 to -47 V dc

Input voltage range:

Device type 01 .................................................................4.25 V dc to 41.25 V dc

Device type 03 .................................................................-4.25 V dc to -41.25 V dc

Device type 02 .................................................................4.25 V dc to 61.25 V dc

Device type 04 .................................................................-4.25 V dc to -51.25 V dc

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at

the maximum levels may degrade performance and affect reliability.