The information in this document is subject to change without notice. Before using this document, please

confirm that this is the latest version.

Not all products and/or types are available in every country. Please check with an NEC Electronics

sales representative for availability and additional information.

THYRISTORS

AC05DSMA,AC05FSMA

5 A RESIN INSULATION TYPE TRIAC

DATA SHEET

Document No. D15293EJ4V0DS00 (4th edition)

Date Published June 2004 NS CP(K)

Printed in Japan

2002

The mark

shows major revised points.

DESCRIPTION

The AC05DSMA and AC05FSMA are resin insulation type

These products are covered with resin mold on the entire case

and are electrically insulated with electrodes, giving them a

considerable advantage over conventional TRIACs when

mounting on a heatsink board or performing high-density

mounting.

These products features ratings and electrical characteristics

equal to TO-220AB package TRIAC and a high reliability design.

FEATURES

• Insulation type TRIAC fully covered with resin on the entire

case other than electrode leads

• Insulation voltage and conduction equal to conventional mica

and polyester film

• Can be replaced with TO-220AB package

• High allowable on-current when using a single unit

APPLICATIONS

Non-contact switches of motor speed control, heater temperature control, lamp light control

PACKAGE DRAWING (Unit: mm)

10.5 MAX.

7 ±0.2

3.2 ±0.2

φ

3.0 MAX.

1.3 ±0.2

0.8 ±0.1

2.54 TYP.

2.54 TYP.

1.5 ±0.2

4.7 MAX.

2.5 ±0.1

0.5 ±0.1

12 3

TRIAC

3: Gate

Standard weight: 2 g

*

*