MAS6503 datasheet(3/34 Pages) MAS

tên linh kiện	MAS6503

Giải thích chi tiết về linh kiện	Piezoresistive Sensor Signal Interface IC

PDF	34 Pages

Scroll/Zoom	100%

nhà sản xuất	MAS [Micro Analog systems]

Trang chủ	http://www.mas-oy.com

Logo

3 / 34 page

DA6503.005

14 December 2016

3 (34)

FUNCTIONAL DESCRIPTION

The calibrated measurement value calculations

need to be done outside in the host system by

utilizing the stored calibration coefficient data.

To avoid modification of the EEPROM by mistake

there is an EEPROM write enable bit (EWE) in the

EEPROM Control Register (E6/66HEX) which needs

to be set high (1) before any changes can be done

to the EEPROM.

The XCLR pin can be used to hard reset the device

including the serial communication. However device

reset is possible also via serial bus using the reset

circuit it is recommended to reset the device

manually after every power up to guarantee proper

The EOC pin indicates if a conversion has finished

and the result is ready to be read from the memory

via the serial interface. Using the EOC signal is not

necessary since it is alternatively possible to wait at

least maximum conversion time period before

reading out the result.

MAS6503 bảng dữ liệu(PDF) 3 Page - Micro Analog systems