www.onsemi.com

2

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be

operable above the recommended operating conditions and stressing the parts to these levels is not recommended.

In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.

The absolute maximum ratings are stress ratings only.

Notes:

1. Unless otherwise specified all voltages are referenced to ground.

2. Power Dissipation temperature derating — plastic “N” package: –12mW/°C from 65°C to 85°C.

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended

operating conditions are specified to ensure optimal performance to the datasheet specifications.

ON Semiconductor

does not recommend exceeding them or designing to absolute maximum ratings.

Symbol

Parameter

Rating

Supply Voltage

–0.5 to +7.0V

DC Input Voltage

DC Output Voltage

Clamp Diode Current

±20mA

DC Output Current, per pin

±25mA

±50mA

Storage Temperature Range

–65°C to +150°C

Power Dissipation

Note 2

600mW

S.O. Package only

500mW

Lead Temperature (Soldering 10 seconds)

260°C

Symbol

Parameter

Min.

Max.

Units

Supply Voltage

2

6

V

DC Input or Output Voltage

0

V

Operating Temperature Range

–40

+85

°C

Input Rise or Fall Times

1000

ns

500

ns

400

ns