OVLJRGD8 datasheet(2/4 Pages) TTELEC

2 / 4 page

Issue 1.0

0505

Page 2

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

Oval Red LED Lamp (4mm)

OVLJRGD8

Absolute Maximum Ratings

TA = 25o C unless otherwise noted

Storage Temperature Range

-40 ~ +100 °C

Operating Temperature Range

-40 ~ +95 °C

Reverse Voltage

5 V

Continuous Forward Current1

50 mA

Peak Forward Current (10% Duty Cycle, 1KHz)

200 mA

Power Dissipation

125 mW

260°C

Lead Soldering Temperature (3mm from the base of the epoxy bulb)2

Notes:

For long term performance the drive currents between 10mA and 30mA are recommended. Please contact an Optek sales representative

for more information on recommended drive conditions.

Solder time less than 3 seconds at temperature extreme.

Electrical Characteristics

TA = 25o C unless otherwise noted

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

CONDITIONS

Luminous Intensity

280

400

----

mcd

IF = 20mA

Forward Voltage

----

2.0

2.5

IF = 20mA

Reverse Current

----

100

µA

VR = 5V

Dominant Wavelength

620

624

628

IF = 20mA

2 ½H-H

50% Power Angle

----

100

----

deg

IF = 20mA

2 ½V-V

----

deg

IF = 20mA

Standard Bins (IF = 20mA)

Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown.

Orders for OVLJRGD8 may be filled with any or all bins contained as below.

Important Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. To designate luminous intensity ranks, please contact OPTEK.

3. Pb content <1000PPM.

550

390

280

Luminous intensity is

at P bin or above.

620

628

Dominant Wavelength (nm)

OVLJRGD8 bảng dữ liệu(PDF) 2 Page - TT Electronics.

OVLJRGD8 bảng dữ liệu(HTML) 2 Page - TT Electronics.

Html Pages

1 2 3 4

bảng dữ liệu tải về

Link URL