prel

imin

ary

prel

imin

ary

iC-DXC3

DIGITAL SENSOR I/O DRIVER

Rev B2, Page 4/12

ABSOLUTE MAXIMUM RATINGS

Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no operating conditions!

Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected

interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system

development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer

suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with

respect to actual interferences.

Item

Symbol

Parameter

Conditions

Unit

No.

Min.

Max.

G001 VB

Supply Voltage

Referenced to lowest voltage of GND, OUT

36

V

Referenced to highest voltage of GND, OUT

-36

V

G002 OUT

OUT Voltage

Referenced to lowest voltage of VB, GND

36

V

Referenced to highest voltage of VB, GND

-36

V

G003 GND

GND Voltage

Referenced to lowest voltage of VB, OUT

36

V

Referenced to highest voltage of VB, OUT

-36

V

G004 V()

Voltage at MON, NIN, OE, CFO

-0,3

7

V

G005 Es()

Maximum Surge Energy as indication

for external protection design

Single pulse test between each pins of VB,

OUT or GND. Pulse magnitude less than 55 V,

duration less than 100 µs

6.5

mJ

G006 Vd()

ESD Susceptibility at all pins

HBM, 100 pF discharged through 1.5 kΩ

2

kV

G007 Tj

Junction Temperature

-40

150

°C

G008 Ts

Storage Temperature

-40

150

°C

THERMAL DATA

Operating Conditions: VB = 8..30 V

Item

Symbol

Parameter

Conditions

Unit

No.

Min.

Typ.

Max.

T01 Ta

Operating Ambient Temperature Range no thermal shutdown

-40

+150

°C

All voltages are referenced to ground unless otherwise stated.

All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.