A102

BRecommendation for Press fit Board Assembly

If boards are furnished from the users, HIROSE will assemble the connectors.

Please confirm following requirements.

1Board size: 600 x 600mm max.

2Board through-hole pitch

The board punching bench is designed in the 2.54mm pitch grid. Set the through-hole pitch to pitch (connector side) size to

2.54 x n.

3Connector punching surface indication

For indication on the connector punching surface, mark "FRONT" or "F", and "BACK" or "B" on the reverse side in order to

clearly identify the front and rear sides. In addition, the punching direction should be clearly marked.

4Clearly indicate the board No. and marking position.

5Clearly indicate board mounting hole positions and hole diameters.

In addition, we provide the press fit board assembly from the both sides, For further information, consult HRS company.

BAssembly Drawing

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.