AXL E IOL AO1 I M12 S

8596_en_04

PHOENIX CONTACT

7

10

Assembly

Figure 6

Connection of an actuator to an IO-Link master

via the converter

•

Connect the IO-Link interface of the converter to an IO-

Link port of the higher-level IO-Link master using a stan-

dardized 3-pos. cable.

•

Connect the analog actuator directly to the analog con-

verter output or using a shielded 4-pos. cable.

•

Fasten each connection using the M12 connectors.

11

Local status indicator

Figure 7

Local status indicator

In environments with high levels of interfer-

ence, in particular, Phoenix Contact recom-

mends connecting the converter to an

appropriate functional earth ground point

using an M4 screw.

Desig-

nation

Color

Mean-

ing

State

Description

COM

Green Status of

IO-Link

device

ON

Supply voltage OK

Flashing

Supply voltage

OK, SDCI commu-

nication active

OFF

No supply voltage,

no communication

COM