8235 datasheet(21/22 Pages) PHOENIX

21 / 22 page

IB IL RS UNI(-2MBD)-PAC

8235_en_01

PHOENIX CONTACT

Byte 12 und 13 (Tv, Tn: lead time, lag time)

These two times are used for the RS-232 protocol

The times are specified with a resolution of 1 ms. This allows

for waiting times of 1 ms ... 255 ms.

When transmitting data via RS-232 the RTS signal is set. If Tv

does not equal 0, transmission only starts after this time has

elapsed. After all the data is sent and Tn does not equal 0, the

RTS signal is only set to LOW after this time has elapsed.

PCP communication

15.1

General information

By default upon delivery, the terminal is configured according

to the default settings (under configuration). The terminal can

be configured using process data or PCP to suit your applica-

tion.

In PCP mode, the terminal is configured with the "Config Ta-

ble" object.

Lead time

Lag time

For information on PCP communication,

please refer to the PCP user manuals (see Or-

dering data).

The programs IBS CMD (for standard control-

ler boards) and PC WorX (for Controllers (ILC),

Field Controllers (FC) and Remote Field Con-

trollers (RFC)) are available for the configura-

tion and parameterization of your INTERBUS

system.

For additional information, please refer to the

documentation of the software used.

8235 bảng dữ liệu(PDF) 21 Page - PHOENIX CONTACT