OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

Issue A

04/06

Page 1 of 4

4-Pin Red-Orange LED Lamp

(7.6 mm)

OVFSQ4C8

x

Packaged in tubes

x

Compatible with automatic placement equipment

x

Compatible with infrared and vapor phase reflow solder process

x

Mono-color type

x

Pb-free

The OVFSQ4C8 is designed with higher forward voltage to maximize brightness and incorporates a low-profile

lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low

current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This

square package allows high-density arrays to form light engines.

Applications

x

Automotive: Rear stop/turn signal lamps/truck marker lamps

x

Mood-setting decoration and landscape lighting

x

Special decorative interior/exterior lighting

x

Special effects stage lighting

x

Illumination for signs and channel letters

x

Traffic signals, pedestrian and walkway signs

Product Photo Here

Part Number

Material

Emitted Color

Flux Typ. mlm

OVFSQ4C8

AlInGaP

Red-Orange

4500

Lens Color

Water Clear

2,3 ANODE

1,4 CATHODE

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

RoHS

Moisture