| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ML60852 bảng dữ liệu(PDF) 26 Page - OKI electronic componets |
|
|
|||||||||||||||||||||||||||||
ML60852 bảng dữ liệu(HTML) 26 Page - OKI electronic componets |
|
26 / 81 page ![]() PEDL60852-01 1Semiconductor ML60852 26/81 (11) Operation of 2-layer structure FIFO during bulk transfer The FIFOs of EP1 and EP2 have a 64 bytes x 2-layer structure. Also, when EP4 is assigned for bulk transfer, its FIFO also has a 64-bytes x 2-layer structure. As a consequence, these FIFOs can temporarily store a maximum of 128 bytes of bulk transfer data. (1) 2-Layer reception operation (“O” indicates the assert condition and “x” indicates de-assert condition) In the case of 1 →2→3→4→5a→6 In the case of 1 →2→3→4→5b→6 Layer A 64 bytes Layer B 64 bytes Layer A PKT RDY Layer B PKT RDY EPn receive PKT RDY INTR 1 Start storing data in layer A of reception x x x x 2 Data of one packet has been stored. x 3 Start reception and storing of data in layer B. x 4 Local MCU starts reading layer A. x 5a When the storing of packet in layer B is completed following the completion of reading layer A. 5b When the reading of packet in layer A is completed following the completion of storing data in layer B. xxx x 6 From 5a: Layer A has become empty. From 5b: Layer B has become full. x 7 Starting reading layer B also. x • When one packet of receive data is stored in layer A of the FIFO and EOP is received, the ML60852 asserts the packet ready bit of EPn and also asserts the INTR pin. This makes it possible for the local MCU to read the receive data. • Subsequently, data can be received from the host, and the ML60852 switches the FIFO for storing to layer B. • When one packet of data described above has been read from layer A of the FIFO, make the local MCU reset the receive packet ready status of EPn (by writing a “1” into bit D0 of EPnSTAT). • At the time the EPn receive packet ready status is reset, if the reception of layer B has not been completed, the ML60852 resets the EPn receive packet ready status and de-asserts the INTR pin. • However, if the reception of layer B has been completed a the time the EPn receive packet ready status is reset, the ML60852 rejects the request from the local MCU to reset the EPn receive packet ready status, and continues to maintain the EPn receive packet ready status and the asserted condition of the INTR pin. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |