For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

6

6 - 10

HMC699LP5 / 699LP5E

v05.0110

7 GHz INTEGER N SYNTHESIZER

CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54)

Evaluation PCB

List of Materials for

Item

Description

J1 - J4

PC Mount sMA RF Connector

J5 - J6

2mm DC header

C1 - C5, C8 - C10

1000 pF Capacitor, 0402 Pkg.

C6 - C7

100 pF Capacitor, 0402 Pkg.

C15

1000 pF Capacitor, 0603 Pkg.

C16

4.7 μF Tantalum Capacitor Case A

D

LED Green, 0603 Pkg., +5V

R1

10k Ohm, Resistor, Array

R8, R10

10k Ohm, Resistor, 0402 Pkg.

R11

1k Ohm, Resistor, 0402 Pkg.

R12

100 Ohm, Resistor, 0402 Pkg.

U1

hMC699LP5(E) synthesizer

116106 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

The circuit board used in the application should use RF circuit design techniques. signal lines should have 50 Ohm

impedance while the package backside ground paddle should be connected directly to the ground plane similar to that

shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation

circuit board shown is available from hittite upon request.

Note: The evaluation PCB for the hMC699LP5(E) contains

10 kOhm pull up resistors for each of the control inputs A0

through A5 and s0 through s2. Programming the 489 distinct

division ratios consists of installing or removing jumpers A0

through A5 and s0 though s2.

Note: 0 = Jumper Installed.

1 = Jumper Not Installed.

Evaluation PCB Truth Table

(see Programming Truth Table)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D