TH7108

868/915MHz

FSK/FM/ASK Transmitter

3901007108

Page 13 of 14

Data Sheet

Rev. 008

May/03

8

Reliability Information

Melexis devices are classified and qualified regarding suitability for infrared, vapor phase and wave soldering

with usual (63/37 SnPb-) solder (melting point at 183degC).

The following test methods are applied:

•

IPC/JEDEC J-STD-020A (issue April 1999)

Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount Devices

•

CECC00802 (issue 1994)

Standard Method For The Specification of Surface Mounting Components (SMDs) of Assessed Quality

•

MIL 883 Method 2003 / JEDEC-STD-22 Test Method B102

Solderability

For all soldering technologies deviating from above mentioned standard conditions (regarding peak

temperature, temperature gradient, temperature profile etc) additional classification and qualification tests

have to be agreed upon with Melexis.

The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of

adhesive strength between device and board.

For more information on manufacturability/solderability see quality page at our website:

http://www.melexis.com/

9

ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).

Always observe Electro Static Discharge control procedures whenever handling semiconductor products.

Your Notes