| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ZHT431 bảng dữ liệu(PDF) 2 Page - Diodes Incorporated |
|
|
|||||||||||||||||||||||||||||
ZHT431 bảng dữ liệu(HTML) 2 Page - Diodes Incorporated |
|
2 / 9 page ![]() ZHT431 Document number: DS32157 Rev. 12 - 2 2 of 9 www.diodes.com April 2018 © Diodes Incorporated ZHT431 Absolute Maximum Ratings (Voltages to GND Unless Otherwise Stated.) Parameter Rating Unit Cathode Voltage (VZ) 20 V Cathode Current 150 mA Operating Temperature -55 to +125 °C Storage Temperature -55 to +150 °C Power Dissipation (TA = +25°C, TJMAX = +150°C) 330 mW Recommended Operating Conditions Parameter Min Max Unit Cathode Voltage VREF — 20 V Cathode Current 0.05 100 mA Electrical Characteristics (Test conditions unless otherwise specified: TA = +25°C.) Symbol VParameter Values Unit Conditions Min. Typ. Max. VREF Reference Voltage 2% 1% 0.5% 2.45 2.475 2.4875 2.50 2.50 2.50 2.55 2.525 2.5125 V IL = 10mA (Fig.1), VZ = VREF VDEV Deviation of Reference Input Voltage Over Temperature — 10 30 mV IL = 10mA, VZ = VREF TA = Full Range (Fig.1) ΔVREF ΔVZ Ratio of the Change in Reference Voltage to the Change in Cathode Voltage — -1.85 -2.7 mV/V VZ from VREF to 10V IZ = 10mA (Fig.2) — -1.0 -2.0 mV/V VZ from 10V to 20V IZ = 10mA (Fig.2) IREF Reference Input Current — 0.12 1.0 µA R1 = 10k, R2 = O/C, lL = 10mA (Fig.2) ΔIREF Deviation of Reference Input Current Over Temperature — 0.04 0.2 µA R1 = 10k, R2 = O/C, IL=10mA, TA = Full Range (Fig.2) IZMIN Minimum Cathode Current for Regulation — 35 50 µA VZ = VREF (Fig.1) IZOFF Off-state Current — — 0.1 µA VZ = 20V, VREF = 0V (Fig.3) RZ Dynamic Output Impedance — — 0.75 V VZ = VREF (Fig.1), f = 0Hz, IC = 1mA to 100mA Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference input voltage over the full temperature range. The average temperature coefficient of the reference input voltage, VREF is defined as: The dynamic output impedance, RZ, is defined as: When the device is programmed with two external resistors, R1 and R2, (Fig. 2), the dynamic output impedance of the overall circuit, R’, is defined as: |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |