FH35C datasheet(10/12 Pages) HIROSE

tên linh kiện	FH35C

Giải thích chi tiết về linh kiện	0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector

PDF	12 Pages

Scroll/Zoom	100%

nhà sản xuất	HIROSE [Hirose Electric]

Trang chủ	http://www.hirose-connectors.com

Logo

10 / 12 page

FH35C Series●0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector

[Operational Method]

BConnector Handling and Precautions

4. Locking method

❶ Operate the actuator in a rotational manner and press it down.

Rotate and push down on the middle portion or the entire width of the actuator using the finger tip.

Be sure to distribute the pressure evenly across the actuator, pressing down on only one side of the actuator

may damage the actuator. Excessive force on the housing can also lead to damage or malfunction.

5. Removing the FPC

❶ Slowly rotate the actuator in an upward motion. After it is unlocked, the FPC can be removed.

❷ When unlocking the actuator, always touch the middle portion of the actuator.

Again, be sure to distribute the pressure evenly across the actuator, pressing down on only one side may

damage the actuator. The actuator has a maximum opening of 90°. Trying to open it more than that or applying

any unnecessary force to the actuator will cause damage and possibly failure of the connector.

This connector uses a back flip type structure. The direction of the FPC insertion and that of the actuator are

different from front flip type connectors. Do not to try to open the actuator from the FPC side.

FH35C bảng dữ liệu(PDF) 10 Page - Hirose Electric