DATASHEET

Display

Through-hole

EADCD040YA2

6

Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May 15, 2014

Issue No : DDF-0001884. Rev.2

www.everlightamericas.com

Application Restrictions

1. Specification described in this document. Above specification may be changed without notice. EVERLIGHT

2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in

the product which does not comply with the absolute maximum ratings and the instructions included in these

specification sheets.

4. ESD (Electrostatic Discharge)

The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.

When handling the products, the following measures against electrostatic discharge are strongly

recommended:

Eliminating the charge

Grounded wrist strap, ESD footwear, clothes, and floors

Grounded workstation equipment and tools

ESD table/shelf mat made of conductive materials

Proper grounding is required for all devices, equipment, and machinery used in product assembly.

Surge protection should be considered when designing of commercial products.

If tools or equipment contain insulating materials such as glass or plastic,

the following measures against electrostatic discharge are strongly recommended:

Dissipating static charge with conductive materials

Preventing charge generation with moisture

Neutralizing the charge with ionizers

5. The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not

subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, it may

cause migration resulting in LED damage.