| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ZL6100ALAF bảng dữ liệu(PDF) 3 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
ZL6100ALAF bảng dữ liệu(HTML) 3 Page - Renesas Technology Corp |
|
3 / 34 page ![]() ZL6100 FN6876 Rev 3.00 Page 3 of 34 August 29, 2012 Absolute Maximum Ratings (Note 5) Thermal Information DC Supply Voltage for VDD Pin. . . . . . . . . . . . . . . . . . . -0.3V to 17V Logic I/O Voltage for CFG, DLY(0,1), EN, FC(0,1), ILIM(0,1), MGN, PG, SA(0,1), SALRT, SCL, SDA, SS, SYNC, UVLO, V(0,1) Pins . . . . . . . . . . . . . . . . . . . . -0.3V to 6.5V Analog Input Voltages for VSEN+, VSEN-, VTRK, XTEMP Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 6.5V Analog Input Voltages for ISENA, ISENB Pins . . . . . . -1.5V to 6.5V MOSFET Drive Reference for VR Pin . . . . . . . . . . . . . -0.3V to 6.5V Logic Reference for V25 Pin . . . . . . . . . . . . . . . . . . . . . . -0.3V to 3V Ground Voltage Differential (VDGND-VSGND) for DGND - SGND, PGND - SGND Pins . . . . . . . . . . . -0.3V to +0.3V High Side Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 30V Boost to Switch Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 8V High Side Drive Voltage . . . . . . . . . . . . . . (VSW - 0.3) to (VBST + 0.3) Low Side Drive Voltage . . . . . . . . . . . . . .(PGND - 0.3) to (VR + 0.3) Switch Node Continuous . . . . . . . . . . . . . . . . . . . (PGND - 0.3) to 30 Switch Node Transient (<100ns) . . . . . . . . . . . . . . (PGND - 5) to 30 DC Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSUPPLY Thermal Resistance (Typical, Notes 6, 7) JA (°C/W) JC (°C/W) 36 Ld QFN . . . . . . . . . . . . . . . . . . . . . . 35 5 Operating Junction Temperature Range . . . . . . . . .-40°C to +125°C Storage Temperature Range . . . . . . . . . . . . . . . . . .-55°C to +150°C Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp Recommended Operating Conditions Supply Voltage Range (Typical) VDD Tied to VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0V to 5.5V VR Floating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V to 14V Output Voltage Range VOUT (Notes 5, 8) . . . . . . . . . . ..0.54 to 5.5V CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. NOTES: 5. Voltage measured with respect to SGND. 6. JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech Brief TB379. 7. For JC, the “case temp” location is the center of the exposed metal pad on the package underside. 8. Includes margin limits. Electrical Specifications VDD = 12V, TA = -40°C to +85°C, unless otherwise specified. Typical values are at TA = +25°C. Boldface limits apply over the operating temperature range, -40°C to +85°C. PARAMETER CONDITIONS MIN (Note 19) TYP MAX (Note 19) UNIT INPUT AND SUPPLY CHARACTERISTICS IDD Supply Current at fSW = 200kHz IDD Supply Current at fSW = 1.4MHz GH, GL no load; MISC_CONFIG[7] = 1 – – 16 25 30 50 mA mA IDDS Shutdown Current EN = 0V No I2C/SMBus activity – 6.5 9 mA VR Reference Output Voltage VDD > 6V, IVR < 20mA 4.5 5.2 5.5 V V25 Reference Output Voltage VR > 3V, IV25 < 20mA 2.25 2.5 2.75 V OUTPUT CHARACTERISTICS Output Voltage Adjustment range (Note 9) VIN > VOUT 0.6 – 5.0 V Output Voltage Set-point Resolution (Note 10) Set using resistors – 10 – mV Set using I2C/SMBus – ±0.025 – % FS (Note 10) Output Voltage Accuracy (Note 11) Includes line, load, temp -1 – 1 % VSEN input Bias Current VSEN = 5.5V – 110 200 µA Current Sense Differential Input Voltage (Ground Referenced) VISENA - VISENB -100 – 100 mV Current Sense Differential Input Voltage (VOUT Referenced; VOUT must be less than 4.0V) VISENA - VISENB - 50 – 50 mV Current Sense Input Bias Current Ground referenced -100 – 100 µA Current Sense Input Bias Current (VOUT Referenced, VOUT < 4.0 V) ISENA -1 – 1 µA ISENB -100 – 100 µA |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |