SC2612AMSTRT datasheet(9/12 Pages) SEMTECH

tên linh kiện	SC2612AMSTRT

Giải thích chi tiết về linh kiện	600kHz/200kHz Step-Down DC/DC Converter

PDF	12 Pages

Scroll/Zoom	100%

nhà sản xuất	SEMTECH [Semtech Corporation]

Trang chủ	http://www.semtech.com

Logo

9 / 12 page

 2003 Semtech Corp.

www.semtech.com

POWER MANAGEMENT

SC2612A/C

Layout Guidelines (Cont.)

4) The Output Capacitor(s) (Cout) should be located as

close to the load as possible, fast transient load cur-

rents are supplied by Cout only, and connections between

Cout and the load must be short, wide copper areas to

minimize inductance and resistance.

5) The SC2612 is best placed over a quiet ground plane

area, avoid pulse currents in the Cin, Q1, Q2 loop flowing

in this area. PGNDH and PGNDL should be returned to

the ground plane close to the package. The AGND pin

should be connected to the ground side of (one of) the

output capacitor(s). If this is not possible, the AGND pin

may be connected to the ground path between the Out-

put Capacitor(s) and the Cin, Q1, Q2 loop. Under no cir-

cumstances should AGND be returned to a ground in-

side the Cin, Q1, Q2 loop.

6) Vcc for the SC2612 should be supplied from the 5V

supply through a 10

Ω resistor, the Vcc pin should be

decoupled directly to AGND by a 0.1

µF ceramic capaci-

tor, trace lengths should be as short as possible.

Vout

Vin

Currents in Power Section

SC2612AMSTRT bảng dữ liệu(PDF) 9 Page - Semtech Corporation