CMP82C55AZ datasheet(9/26 Pages) RENESAS

9 / 26 page

MS82C55A, MQ82C55A, MP82C55A

FN6140 Rev 2.00

Page 9 of 26

June 15, 2006

Operating Modes

Mode 1 - (Strobed Input/Output). This functional configuration

provides a means for transferring I/O data to or from a specified

port in conjunction with strobes or “hand shaking” signals. In

mode 1, port A and port B use the lines on port C to generate or

accept these “hand shaking” signals.

Mode 1 Basic Function Definitions:

• Two Groups (Group A and Group B)

• Each group contains one 8-bit port and one 4-bit control/data

port

• The 8-bit data port can be either input or output. Both inputs

and outputs are latched.

• The 4-bit port is used for control and status of the 8-bit port.

Input Control Signal Definition

(Figures 6 and 7)

STB (Strobe Input)

A “low” on this input loads data into the input latch.

IBF (Input Buffer Full F/F)

A “high” on this output indicates that the data has been loaded

into the input latch: in essence, an acknowledgment. IBF is set by

STB input being low and is reset by the rising edge of the RD

input.

INTR (Interrupt Request)

A “high” on this output can be used to interrupt the CPU when an

input device is requesting service. INTR is set by the condition:

STB is a “one”, IBF is a “one” and INTE is a “one”. It is reset by the

falling edge of RD. This procedure allows an input device to

request service from the CPU by simply strobing its data into the

port.

INTE A

Controlled by bit set/reset of PC4.

INTE B

Controlled by bit set/reset of PC2.

Output Control Signal Definition

(Figure 8 and 9)

OBF - (Output Buffer Full F/F). The OBF output will go “low”

to indicate that the CPU has written data out to the specified port.

This does not mean valid data is sent out of the port at this time

since OBF can go true before data is available. Data is

guaranteed valid at the rising edge of OBF, (See Note 1). The

OBF F/F will be set by the rising edge of the WR input and reset

by ACK input being low.

CONTROL WORD #13

CONTROL WORD #15

Mode 0 Configurations (Continued)

PA7 - PA0

PC7 - PC4

PC3 - PC0

PB7 - PB0

D7 - D0

82C55A

PA7 - PA0

PC7 - PC4

PC3 - PC0

PB7 - PB0

D7 - D0

82C55A

CMP82C55AZ bảng dữ liệu(PDF) 9 Page - Renesas Technology Corp

CMP82C55AZ bảng dữ liệu(HTML) 9 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

bảng dữ liệu tải về

Link URL