FN4659 Rev 13.00

Page 36 of 36

June 1, 2006

HC55120, HC55121, HC55130, HC55140, HC55142, HC55143, HC55150

Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted

in the quality certifications found at www.intersil.com/en/support/qualandreliability.html

Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such

modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are

current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its

subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

For additional products, see www.intersil.com/en/products.html

© Copyright Intersil Americas LLC 2001-2006. All Rights Reserved.

All trademarks and registered trademarks are the property of their respective owners.

Plastic Leaded Chip Carrier Packages (PLCC)

A1

A

SEATING

PLANE

0.015 (0.38)

MIN

VIEW “A”

D2/E2

0.025 (0.64)

0.045 (1.14)

R

0.042 (1.07)

0.056 (1.42)

0.050 (1.27) TP

E

E1

PIN (1)

CL

D1

D

0.020 (0.51) MAX

3 PLCS

0.026 (0.66)

0.032 (0.81)

0.050 (1.27)

MIN

0.013 (0.33)

0.021 (0.53)

0.025 (0.64)

MIN

VIEW “A” TYP.

0.004 (0.10)

C

-C-

D2/E2

CL

NE

ND

IDENTIFIER

(0.12)

M

DS

- B S

AS

0.042 (1.07)

0.048 (1.22)

0.005

32 LEAD PLASTIC LEADED CHIP CARRIER PACKAGE

SYMBOL

INCHES

MILLIMETERS

NOTES

MIN

MAX

MIN

MAX

A

0.125

0.140

3.18

3.55

-

A1

0.060

0.095

1.53

2.41

-

D

0.485

0.495

12.32

12.57

-

D1

0.447

0.453

11.36

11.50

3

D2

0.188

0.223

4.78

5.66

4, 5

E

0.585

0.595

14.86

15.11

-

E1

0.547

0.553

13.90

14.04

3

E2

0.238

0.273

6.05

6.93

4, 5

N28

28

6

ND

7

7

7

NE

9

9

7

Rev. 0 7/98

NOTES:

1. Controlling dimension: INCH. Converted millimeter dimen-

sions are not necessarily exact.

2. Dimensions and tolerancing per ANSI Y14.5M-1982.

3. Dimensions D1 and E1 do not include mold protrusions. Al-

lowable mold protrusion is 0.010 inch (0.25mm) per side.

Dimensions D1 and E1 include mold mismatch and are mea-

sured at the extreme material condition at the body parting

line.

4. To be measured at seating plane

contact point.

5. Centerline to be determined where center leads exit plastic

body.

6. “N” is the number of terminal positions.

7. ND denotes the number of leads on the two shorts sides of the

package, one of which contains pin #1. NE denotes the num-

ber of leads on the two long sides of the package.

-C-