 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
HC55121IBZ bảng dữ liệu(PDF) 9 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HC55121IBZ bảng dữ liệu(HTML) 9 Page - Renesas Technology Corp |
|
|
9 / 36 page  INSERTION LOSS 2-Wire to 4-Wire Forward and Reverse 0dBm, 1kHz • ••• PTG = Open (Note 19, Figure 8) -0.2 - 0.2 dB Forward Only Forward Only PTG = GND (Note 20, Figure 8) -6.22 -6.02 -5.82 dB 4-Wire to 2-Wire Forward and Reverse 0dBm, 1kHz (Note 21, Figure 8) -0.2 - 0.2 dB Forward Only • Forward Only ••• GAIN TRACKING (Ref = -10dBm, at 1.0kHz) 2-Wire to 4-Wire Forward and Reverse -40dBm to +3dBm (Note 22, Figure 8) -0.1 - 0.1 dB Forward Only • Forward Only ••• -55dBm to -40dBm (Note 22, Figure 8) -0.2 - 0.2 dB 4-Wire to 2-Wire Forward and Reverse -40dBm to +3dBm (Note 23, Figure 8) -0.1 - 0.1 dB Forward Only • Forward Only ••• -55dBm to -40dBm (Note 23, Figure 8) -0.2 - 0.2 dB NOISE Idle Channel Noise at 2-Wire C-Message Weighting - 10.5 13 dBrnC Forward Only • Forward Only ••• Forward and Reverse Psophometric Weighting (Note 24, Note 30, Figure 9) - -79.5 -77 dBmp Idle Channel Noise at 4-Wire C-Message Weighting - 10.5 13 dBrnC Forward Only • Forward Only ••• Forward and Reverse Psophometrical Weighting (Note 25, Note 30, Figure 9) - -79.5 -77 dBmp HARMONIC DISTORTION 2-Wire to 4-Wire Forward and Reverse 0dBm, 0.3kHz to 3.4kHz (Note 26, Figure 7) - -67 -50 dB Forward Only • Forward Only ••• 4-Wire to 2-Wire Forward and Reverse 0dBm, 0.3kHz to 3.4kHz (Note 27, Figure 8) - -67 -50 dB Forward Only • Forward Only ••• FIGURE 10. CONSTANT LOOP CURRENT TOLERANCE FIGURE 11. TIPX VOLTAGE Electrical Specifications TA = -40°C to 85°C, VCC = +5V 5%, VBH = -48V, VBL = -24V, PTG = Open, RP1 = RP2 = 0ZT = 120k, RLIM = 38.3k, RD = 50k, RDC_RAC = 20k, ROH = 40k, CH = 0.1F, CDC = 4.7F, CRT/REV = 0.47F, GND = 0V, RL = 600. Unless Otherwise Specified. (•) Symbol used to indicate the test applies to the part. (NA) symbol used to indicate the test does not apply to the part. (Continued) PARAMETER TEST CONDITIONS MIN TYP MAX UNITS HC55120 HC55121 HC55130/1 HC55140/1 HC55142/3 HC55150/1 600 VTR RL TIP RING VTX VRX RLIM RLIM 38.3k TIP RING S R1 7k VBH VTX VRX IR1 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
