ISL55100AEVAL3Z datasheet(4/14 Pages) RENESAS

4 / 14 page

ISL55100A

FN7486 Rev 3.00

Page 4 of 14

December 4, 2014

Absolute Maximum Ratings

Thermal Information

VCC to VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 19V

VEXT to VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 7V

Input Voltages

DATA, DRV EN, CVX, VH, VL, VINP, COMPX, LOWSWING

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (VEE - 0.5V) to (VCC + 0.5V)

Output Voltages

DOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (VEE - 0.5V) to (VH + 0.5V)

QX . . . . . . . . . . . . . . . . . . . . . (COMP LOW - 0.5V) to (COMP HIGH + 0.5V)

Thermal Resistance (Typical, Notes 4, 5)

JA (°C/W) JC (°C/W)

72 Ld QFN Package . . . . . . . . . . . . . . . . . . . 23

2.0

Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . +150°C

Maximum Storage Temperature Range . . . . . . . . . . . . . -65°C to +150°C

Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product

reliability and result in failures not covered by warranty.

NOTES:

JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech

Brief TB379.

5. For

JC, the “case temp” location is the center of the exposed metal pad on the package underside.

6. Device temperature is closely tied to data-rates, driver loads and overall pin activity. Review “Power Dissipation Considerations” on page 9 for more

information.

Recommended Operating Conditions

PARAMETER

SYMBOL

MIN

(Note 13)TYP

MAX

(Note 13)UNITS

Device Power-(VEXT = VEE) VEXT Not Used

VCC - VEE

12 (Note 10)15

Device Power-(VEXT = VEE + 5.5V)

VCC - VEE

9 (Note 10)15

VEXT Optional External Logic Power

VEXT - VEE

5.5 (Note 10)

5.75

6.0

Driver Output High Rail

VEE + 1

VCC - 0.5

Driver Output Low Rail

VEE + 0.5

VEE + 6

Comparator Output High Rail

COMP-High

VEE + 1

VCC - 0.5

Comparator Output Low Rail

COMP-Low

VEE + 0.5

VEE + 6

Ambient Temperature

-40

+85

°C

Junction Temperature

+150

°C

Electrical Specifications

Test Conditions: VCC = 12V, VEE = -3V, VH = 6V, VL = 0V, Comp-High = 5V, Comp-Low = 0V, V5V = VEE and

LOWSWING = VCC.

PARAMETER

SYMBOL

TEST CONDITIONS

MIN

TYP

MAX

UNITS

DRIVER DC CHARACTERISTICS

ISL55100A Output Resistance

ROUTD

IO = ±200mA, data not toggling

4.5

7.0

ISL55100A DC Output Current

IOUTD

Per Individual driver

±200

ISL55100A AC Output Current (Note 6)IOUTDAC

Per Individual driver

1.0

ISL55100A Minimum Output Swing

VOMIN

VH = 200mV, VL = 0V

185

Disabled HIZ Leakage Current

HIZ

VOUT = VCC with VH = VL + VEE or VOUT = VEE

with VH = VL = VCC

-1

µA

DRIVER TIMING CHARACTERISTICS

Data

 to DOUT Propagation Delay

tPD

Lowswing Disabled (Note 9)8

Lowswing Enabled (Note 9)9

Driver Timing Skew, All Edges (Note 7)

Disable (HIZ) Time

tDIS

DVREN

 Transition from Enable to Disable

ISL55100AEVAL3Z bảng dữ liệu(PDF) 4 Page - Renesas Technology Corp

ISL55100AEVAL3Z bảng dữ liệu(HTML) 4 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

bảng dữ liệu tải về

Link URL