M25P32 datasheet(26/39 Pages) STMICROELECTRONICS

tên linh kiện	M25P32

Giải thích chi tiết về linh kiện	32 Mbit, Low Voltage, Serial Flash Memory With 50MHz SPI Bus Interface

PDF	39 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

26 / 39 page

M25P32

26/39

Figure 21. Release from Deep Power-down (RES) Instruction Sequence

Driving Chip Select (S) High after the 8-bit instruc-

tion byte has been received by the device, but be-

fore the whole of the 8-bit Electronic Signature has

been transmitted for the first time (as shown in Fig-

ure 21.), still ensures that the device is put into

Standby Power mode. If the device was not previ-

ously in the Deep Power-down mode, the transi-

tion to the Standby Power mode is immediate. If

the device was previously in the Deep Power-

down mode, though, the transition to the Standby

Power mode is delayed by tRES1, and Chip Select

(S) must remain High for at least tRES1(max), as

specified in Table 14.. Once in the Standby Power

mode, the device waits to be selected, so that it

can receive, decode and execute instructions.

AI04078B

34567

tRES1

Stand-by Mode

Deep Power-down Mode

High Impedance

Instruction

M25P32 bảng dữ liệu(PDF) 26 Page - STMicroelectronics