Data Sheet

10

Rev. 1.0

2017-08-09

HS CAN Transceiver

High Speed CAN Transceiver

Modes of operation

5.4

Power-down state

In the power-down state the differential input resistors of the receiver are switched off. The CANH and CANL

bus interface of the TLE9250 is floating and acts as a high-impedance input with a very small leakage current.

The high-ohmic input does not influence the “recessive” level of the CAN network and allows an optimized

EME performance of the entire HS CAN network. In power-down state the transceiver is an invisible node to

the bus.