| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LT6200 bảng dữ liệu(PDF) 9 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LT6200 bảng dữ liệu(HTML) 9 Page - Linear Technology |
|
9 / 24 page ![]() LTC2387-18 9 238718fa For more information www.linear.com/LTC2387-18 pin FuncTions VDD (Pins 11, 12): 5V Analog Power Supply. The range of VDD is 4.75V to 5.25V. The two pins should be shorted together and bypassed to GND with 0.1μF and 10μF ce- ramic capacitors. PD (Pin 13): Digital input that enables power-down mode. When PD is low, the LTC2387 enters power-down mode, and all circuitry (including the LVDS interface) is shut down. When PD is high, the part operates normally. Logic levels are determined by OVDD. TESTPAT (Pin 14): Digital input that forces the LVDS data outputs to be a test pattern. When TESTPAT is high, the digital outputs are a test pattern. When TESTPAT is low, the digital outputs are the ADC conversion result. Logic levels are determined by OVDD. DB–/DB+, DA–/DA+ (Pins 15/16, 17/18): Serial LVDS Data Outputs. In one-lane output mode, DB–/DB+ are not used and their LVDS driver is disabled to reduce power consumption. DCO–/DCO+ (Pins 19/20): LVDS Data Clock Output. This is an echoed version of CLK–/CLK+ that can be used to latch the data outputs. OVDD (Pin 22): 2.5V Output Power Supply. The range of OVDD is 2.375V to 2.625V. Bypass to GND with a 0.1μF ceramic capacitor. CLK–/CLK+ (Pins 23/24): LVDS Clock Input. This is an externally applied clock that serially shifts out the conver- sion result. TWOLANES (Pin 25): Digital input that enables two-lane output mode. When TWOLANES is high (two-lane output mode), the ADC outputs two bits at a time on DA–/DA+ and DB–/DB+. When TWOLANES is low (one-lane output mode), the ADC outputs one bit at a time on DA–/DA+, and DB–/DB+aredisabled.LogiclevelsaredeterminedbyVDDL. CNV–/CNV+ (Pins 27/28): Conversion Start LVDS Input. A rising edge on CNV+ puts the internal sample-and-hold into the hold mode and starts a conversion cycle. CNV+ can also be driven with a 2.5V CMOS signal if CNV– is tied to GND. VDDL (Pins 30, 31): 2.5V Analog Power Supply. The range of VDDL is 2.375V to 2.625V. The two pins should be shorted together and bypassed to GND with 0.1μF and 10μF ceramic capacitors. VCM (Pin 32): Common Mode Output. VCM, nominally 2.048V, can be used to set the common mode of the ana- log inputs. Bypass to GND with a 0.1μF ceramic capacitor close to the pin. If VCM is not used, the bypass capacitor is not necessary as long as the parasitic capacitance on the VCM pin is under 10pF. Exposed Pad (Pin 33): The exposed pad on the bottom of the package. Connect to the ground plane of the PCB using multiple vias. |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |