EVKT-MACOM

– MAGALPHA COMMUNICATION KIT

EVKT-MACOM

www.MonolithicPower.com

16

3/15/2017

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

3. Sensor Parameters

The user-configurable parameters are defined during the auto-discovery process. This process occurs

at Macom App start-up or when a disconnection/connection cycle occurs. The software discovers which

sensor generation is connected automatically and finds out which parameters are available for this

specific product (see Figure 26).

Figure 26: Macom App Sensor Parameters

A connection cycle is required after a sensor hot swap (connecting or unplugging the sensor while the

system is on) in order to re-run the auto-discovery process on the freshly connected sensor.

To perform a connection cycle, simply click on connection twice: once to disconnect the device and

again to reconnect it.

Figure 27: Macom App Connection Cycle

Sensor Parameters