Analyzing Connectors

ViewConn Pro Power Meter

Analyzing connectors is as easy as capturing the

images. Select analysis and touch the connector

portion of the screen.

necessary. Just select Single mode or Multimode.

ConnectorView Plus software

uses IEC 61300-3-35 as the

default standard for its analysis,

but the acceptance criteria

can be modified to allow for

different corporate standards.

Report is automatically generated whenever criteria are changed.

You can easily go back and view

any

image you have saved.

ViewConn Pro has an

add-in module can be installed by Lightel or can be easily installed by the

user. Two versions are available for standard or for higher power ranges.

Readings can be taken by themselves or linked to an Analysis Report.

The data from each saved report is also automatically saved in a Summary Report.

The

ConnectorView Plus

software can be set to automatically

save the Analysis Report or you can

choose to save only selected reports. Again it’s as simple as a

touch of the screen.

VC8-OPM installed

in ViewConn Pro