| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MP9943 bảng dữ liệu(PDF) 3 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP9943 bảng dữ liệu(HTML) 3 Page - Monolithic Power Systems |
|
3 / 20 page ![]() MP9943 – 36V, 3A PEAK SYNCHRONOUS STEP-DOWN CONVERTER MP9943 Rev.1.1 www.MonolithicPower.com 3 7/4/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. ABSOLUTE MAXIMUM RATINGS (1) VIN ..................................................-0.3V to 40V VSW..................................................-0.3V to 41V VBS ......................................................... VSW+6V All Other Pins................................ -0.3V to 6V (2) Continuous Power Dissipation (TA = +25°C) (3) QFN-8 (3mmx3mm)................................. 2.27W Junction Temperature...............................150°C Lead Temperature ....................................260°C Storage Temperature................. -65°C to 150°C Recommended Operating Conditions(4) Continuous Supply Voltage VIN...........4V to 36V Output Voltage VOUT..................0.8V to DMaxхVIN Operating Junction Temp (TJ).. -40°C to +125°C Thermal Resistance (5) θJA θJC QFN-8 (3mmx3mm)............... 55 ...... 13... °C/W Notes: 1) Absolute maximum ratings are rated under room temperature unless otherwise noted. Exceeding these ratings may damage the device. 2) About the details of EN/SYNC pin’s ABS MAX rating, please refer to page 12, Enable/SYNC control section. 3) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- ambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 4) The device is not guaranteed to function outside of its operation condition. 5) Measured on JESD51-7, 4-layer PCB. |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |